The Relationship Between Composite Inflammatory Ratios and Complications of Massive Ischaemic Stroke.

OBJECTIVE: To investigate the relationship between complications of massive cerebral infarction (MCI) and composite inflammatory ratios. STUDY DESIGN: A case-control study. Place and Duration of the Study: Department of Neurology, Affiliated Hospital of Putian University, Putian, China, from January 2019 to November 2021. METHODOLOGY: Eighty-two patients with MCI underwent blood tests within 24 hours of admission. Complications such as cerebral herniation, haemorrhage transformation (HT), and stroke-associated pneumonia (SAP) were evaluated based on imaging examinations. The prognosis was assessed using the modified Rankin Scale score (mRS) at discharge. RESULTS: Among the 82 patients, the cerebral herniation group had higher levels of systemic immune inflammation index (SII) and neutrophil-to-lymphocyte ratio (NLR) compared to the non-cerebral herniation group. MCI patients who developed HT had higher levels of SII, NLR, mean platelet volume/platelet (MPV/PLT), and platelet-to-lymphocyte ratio (PLR). The SAP group had higher levels of MPV/PLT and NLR compared to the non-SAP group. The poor prognosis group had higher SII and NLR levels but a lower lymphocyte-to-monocyte ratio (LMR) compared to the good prognosis group. CONCLUSION: NLR showed high accuracy in predicting complications and the short-term prognosis of MCI. SII was linked to cerebral herniation, HT, and the short-term prognosis of MCI. MPV/PLT was found to be related to SAP and HT caused by MCI. LMR may act as a protective factor for the short-term prognosis of MCI. KEY WORDS: Massive cerebral infarction, Neutrophil-to-lymphocyte ratio, Systemic immune inflammation index, Prognosis.

Gene-gene interaction network analysis indicates CNTN2 is a candidate gene for idiopathic generalized epilepsy.

Twin and family studies have established the genetic contribution to idiopathic generalized epilepsy (IGE). The genetic architecture of IGE is generally complex and heterogeneous, and the majority of the genetic burden in IGE remains unsolved. We hypothesize that gene-gene interactions contribute to the complex inheritance of IGE. CNTN2 (OMIM* 615,400) variants have been identified in cases with familial adult myoclonic epilepsy and other epilepsies. To explore the gene-gene interaction network in IGE, we took the CNTN2 gene as an example and investigated its co-occurrent genetic variants in IGE cases. We performed whole-exome sequencing in 114 unrelated IGE cases and 296 healthy controls. Variants were qualified with sequencing quality, minor allele frequency, in silico prediction, genetic phenotype, and recurrent case numbers. The STRING_TOP25 gene interaction network analysis was introduced with the bait gene CNTN2 (denoted as A). The gene-gene interaction pair mode was presumed to be A + c, A + d, A + e, with a leading gene A, or A + B + f, A + B + g, A + B + h, with a double-gene A + B, or other combinations. We compared the number of gene interaction pairs between the case and control groups. We identified three pairs in the case group, CNTN2 + PTPN18, CNTN2 + CNTN1 + ANK2 + ANK3 + SNTG2, and CNTN2 + PTPRZ1, while we did not discover any pairs in the control group. The number of gene interaction pairs in the case group was much more than in the control group (p = 0.021). Taking together the genetic bioinformatics, reported epilepsy cases, and statistical evidence in the study, we supposed CNTN2 as a candidate pathogenic gene for IGE. The gene interaction network analysis might help screen candidate genes for IGE or other complex genetic disorders.

Exploration of the relationship between tumor-infiltrating lymphocyte score and histological grade in breast cancer.

BACKGROUND: The histological grade is an important factor in the prognosis of invasive breast cancer and is vital to accurately identify the histological grade and reclassify of Grade2 status in breast cancer patients. METHODS: In this study, data were collected from 556 invasive breast cancer patients, and then randomly divided into training cohort (n = 335) and validation cohort (n = 221). All patients were divided into actual low risk group (Grade1) and high risk group (Grade2/3) based on traditional histological grade, and tumor-infiltrating lymphocyte score (TILs-score) obtained from multiphoton images, and the TILs assessment method proposed by International Immuno-Oncology Biomarker Working Group (TILs-WG) were also used to differentiate between high risk group and low risk group of histological grade in patients with invasive breast cancer. Furthermore, TILs-score was used to reclassify Grade2 (G2) into G2 /Low risk and G2/High risk. The coefficients for each TILs in the training cohort were retrieved using ridge regression and TILs-score was created based on the coefficients of the three kinds of TILs. RESULTS: Statistical analysis shows that TILs-score is significantly correlated with histological grade, and is an independent predictor of histological grade (odds ratio [OR], 2.548; 95%CI, 1.648-3.941; P < 0.0001), but TILs-WG is not an independent predictive factor for grade (P > 0.05 in the univariate analysis). Moreover, the risk of G2/High risk group is higher than that of G2/Low risk group, and the survival rate of patients with G2/Low risk is similar to that of Grade1, while the survival rate of patients with G2/High risk is even worse than that of patients with G3. CONCLUSION: Our results suggest that TILs-score can be used to predict the histological grade of breast cancer and potentially to guide the therapeutic management of breast cancer patients.

Computer-Aided Multiphoton Microscopy Diagnosis of 5 Different Primary Architecture Subtypes of Meningiomas.

Meningiomas rank among the most common intracranial tumors, and surgery stands as the primary treatment modality for meningiomas. The precise subtyping and diagnosis of meningiomas, both before and during surgery, play a pivotal role in enabling neurosurgeons choose the optimal surgical program. In this study, we utilized multiphoton microscopy (MPM) based on 2-photon excited fluorescence and second-harmonic generation to identify 5 common meningioma subtypes. The morphological features of these subtypes were depicted using the MPM multichannel mode. Additionally, we developed 2 distinct programs to quantify collagen content and blood vessel density. Furthermore, the lambda mode of the MPM characterized architectural and spectral features, from which 3 quantitative indicators were extracted. Moreover, we employed machine learning to differentiate meningioma subtypes automatically, achieving high classification accuracy. These findings demonstrate the potential of MPM as a noninvasive diagnostic tool for meningioma subtyping and diagnosis, offering improved accuracy and resolution compared with traditional methods.

Improving the diagnosis of ductal carcinoma in situ with microinvasion without immunohistochemistry: An innovative method with H&E-stained and multiphoton microscopy images.

Ductal carcinoma in situ with microinvasion (DCISM) is a challenging subtype of breast cancer with controversial invasiveness and prognosis. Accurate diagnosis of DCISM from ductal carcinoma in situ (DCIS) is crucial for optimal treatment and improved clinical outcomes. However, there are often some suspicious small cancer nests in DCIS, and it is difficult to diagnose the presence of intact myoepithelium by conventional hematoxylin and eosin (H&E) stained images. Although a variety of biomarkers are available for immunohistochemical (IHC) staining of myoepithelial cells, no single biomarker is consistently sensitive to all tumor lesions. Here, we introduced a new diagnostic method that provides rapid and accurate diagnosis of DCISM using multiphoton microscopy (MPM). Suspicious foci in H&E-stained images were labeled as regions of interest (ROIs), and the nuclei within these ROIs were segmented using a deep learning model. MPM was used to capture images of the ROIs in H&E-stained sections. The intensity of two-photon excitation fluorescence (TPEF) in the myoepithelium was significantly different from that in tumor parenchyma and tumor stroma. Through the use of MPM, the myoepithelium and basement membrane can be easily observed via TPEF and second-harmonic generation (SHG), respectively. By fusing the nuclei in H&E-stained images with MPM images, DCISM can be differentiated from suspicious small cancer clusters in DCIS. The proposed method demonstrated good consistency with the cytokeratin 5/6 (CK5/6) myoepithelial staining method (kappa coefficient = 0.818).

Controllable Adaptive Molybdate-Oligosaccharide Nanoparticles Regulate M2 Macrophage Mitochondrial Function and Promote Angiogenesis via PI3K/HIF-1α/VEGF Pathway to Accelerate Diabetic Wound Healing.

The complex wound environment of diabetic wounds leads to poor treatment efficacy, and the inflammatory disorders and vascular injury are the primary causes of death in such patients. Herein, a sprayable, controllable adaptive, pH-responsive nanosystem of molybdate and oligosaccharide (CMO) is specially developed as an immunomodulatory and angiogenesis-promotion material for diabetic wound healing. CMO exhibited pH-responsive release of Mo2+ and oligosaccharide (COS), specifically in response to the alkalescent environment observed in diabetic wounds. CMO provide an anti-inflammatory environment by promoting M2 polarization through significantly stimulating macrophage mitochondrial function. Specifically, CMO with a certain concentration reduce reactive oxygen species (ROS) and tumor necrosis factor α (TNF-α) expression, and upregulated mitochondrial membrane potential (MMP), superoxide dismutase (SOD), and interleukin 10 (IL-10) expression in macrophages. Moreover, CMO facilitate angiogenesis via upregulating the PI3K/HIF-1α/VEGF pathway-a critical process for the formation of new blood vessels that supply nutrients and oxygen to the healing tissue. Remarkably, CMO promote cell viability and migration of endothelial cells, and enhance the expression of angiogenic genes. In vitro and in vivo studies suggest this simple but powerful nanosystem targeting mitochondrial function has the potential to become an effective treatment for diabetic wound healing.

Prognostic significance of collagen signatures at breast tumor boundary obtained by combining multiphoton imaging and imaging analysis.

PURPOSE: Collagen features in breast tumor microenvironment is closely associated with the prognosis of patients. We aim to explore the prognostic significance of collagen features at breast tumor border by combining multiphoton imaging and imaging analysis. METHODS: We used multiphoton microscopy (MPM) to label-freely image human breast tumor samples and then constructed an automatic classification model based on deep learning to identify collagen signatures from multiphoton images. We recognized three kinds of collagen signatures at tumor boundary (CSTB I-III) in a small-scale, and furthermore obtained a CSTB score for each patient based on the combined CSTB I-III by using the ridge regression analysis. The prognostic performance of CSTB score is assessed by the area under the receiver operating characteristic curve (AUC), Cox proportional hazard regression analysis, as well as Kaplan-Meier survival analysis. RESULTS: As an independent prognostic factor, statistical results reveal that the prognostic performance of CSTB score is better than that of the clinical model combining three independent prognostic indicators, molecular subtype, tumor size, and lymph nodal metastasis (AUC, Training dataset: 0.773 vs. 0.749; External validation: 0.753 vs. 0.724; HR, Training dataset: 4.18 vs. 3.92; External validation: 4.98 vs. 4.16), and as an auxiliary indicator, it can greatly improve the accuracy of prognostic prediction. And furthermore, a nomogram combining the CSTB score with the clinical model is established for prognosis prediction and clinical decision making. CONCLUSION: This standardized and automated imaging prognosticator may convince pathologists to adopt it as a prognostic factor, thereby customizing more effective treatment plans for patients.

Core-Satellite Nanoassemblies as SPR/SERS Dual-Mode Plasmonic Sensors for Sensitively Detecting Ractopamine in Complex Media.

Highly sensitive and reliable detection of ß-adrenergic agonists is especially necessary due to the illegal abuse of growth-promoting feed additives. Here, we develop a novel surface plasmon resonance/surface-enhanced Raman scattering (SPR/SERS) dual-mode plasmonic sensor based on core-satellite nanoassemblies for the highly sensitive and reliable detection of ractopamine (RAC). The addition of RAC results in the decomposition of core-satellite nanoassemblies and consequently changes the Rayleigh scattering color of dark-field microscopy (DFM) images and the Raman scattering intensity of SERS spectra. The excellent sensitivity, specificity, and uniformity of this strategy were confirmed by detecting RAC in various complex media in the farm-to-table chain, and the limit of detection (LOD) was 0.03 ng/mL in an aqueous solution. In particular, the convenient access to livestock sewage not only ensures animal welfare but also provides great convenience for the market regulation of ß-agonists. The success of our on-site strategy only with a portable Raman device promises great application prospects for ß-agonist detection.

An adjustable Predictive&Prescriptive method for the RO-based optimal power flow problem.

Traditionally before solving the optimal power flow considering uncertainty (OPF-U) problem, the predicted value of uncertainty parameters, such as wind power, e.g., is derived from data using a statistics approach or machine learning. Based on the predicted uncertainty parameters, the solution to the OPF-U problem can be obtained by the prescriptive analytics technique, such as robust optimization (RO). However, it is unclarified how the prediction error in predictive analytics affects solving the OPF-U problem in prescriptive analytics. We propose an adjustable framework method combining machine learning and RO for the OPF-U problem. The k-nearest neighbor is applied to obtain k samples around the predicted value from sufficient historical data. And the optimization results from a minimum volume ellipsoid set containing the k samples are applied to construct KMV set. Then a robust fluctuation region with an adjustable budget level is gained from the KMV set by a two-term exponential formula, which can be embedded into a two-stage RO model. Computational experiments under test cases of different uncertainty scales show the robustness and adjustability of the proposed fluctuation region are better than the state-of-the-art box and ellipsoidal sets. The solution of the proposed two-stage RO model is more economical than the state-of-the-art RO model. The out-of-sample simulation also demonstrates the proposed adjustable Predictive&Prescriptive method can reduce the computational burden as the scale of the system increases when predictive and prescriptive analytics are separated.

Liquid Interfacial Coassembly of Plasmonic Arrays and Trace Hydrophobic Nanoplastics in Edible Oils for Robust Identification and Classification by Surface-Enhanced Raman Spectroscopy.

The ubiquity of micro-/nanoplastics poses a visible threat to the environment, aquatic organisms, and human beings and has become a global concern. Here, we proposed a liquid interface-based strategy using surface-enhanced Raman spectroscopy to coassemble nanoplastics and gold nanoparticles into a dense and homogeneous plasmonic array, thereby enabling the rapid and sensitive detection of trace nanoplastics. In addition, due to the uniqueness of the oil-water immiscible two-phase interface, we achieved ideal results for the detection of nanoplastics in a complex matrix (e.g., aqueous environment and edible oil) with a detection limit of µg/mL. With the aid of the principal component analysis algorithm, the differentiation and identification of multiple nanoplastic components (e.g., polystyrene, polyethylene, and polyethylene terephthalate) in aqueous environments and common hazards (e.g., Bap and Phe) in edible oil were achieved. Therefore, our self-assembled plasmonic arrays are expected to be used for monitoring environmental pollution and food safety.

Intrinsic SERS Fingerprints of Aptamer-Peptide Conjugates for Direct High-Specific Profiling Abnormal Protein Levels in Cancer Patients.

Surface-enhanced Raman spectroscopy (SERS) with ultrasensitive vibrational fingerprints enables quick identification and trace detection of various kinds of molecules. But proteins usually have low Raman cross sections and are difficult to generate recognizable signals in direct SERS detection. Recently, nucleic acid-peptide conjugates are emerging with great potential in structuring, assembling, catalyzing, sensing, etc., and the coupling of aptamers further enables superior biological recognition and programmability. Here, we develop the aptamer-peptide conjugates as a new kind of SERS probe for direct high-specific profiling abnormal protein levels in cancer patients. The aptamer conjugated with glutathione (GSH) functions as both the recognition element and the SERS reporters that can simultaneously generate SERS fingerprints of both peptides and nucleic acids. This kind of biocompatible probe appears to have excellent performance in high-salt environments and realizes rapid, simple, and multisignal detection of thrombin (TB). Data-driven soft independent modeling of class analogy (DD-SIMCA) is used to distinguish SERS profiles of actual blood samples and realize the identification and classification of cancer patients. Furthermore, the effect of low-temperature storage time on blood samples is analyzed by tracking the changes of SERS profiles; the results hint that plasma samples stored under 4 °C for more than 2 days could generate false negative results due to TB hydrolysis, which has important implications for clinical sample analysis. This kind of nucleic acid-peptide conjugate provides new ideas for SERS sensing strategy in the future.

Studying trabecular bone samples demonstrates a power law relation between deteriorated structure and mechanical properties - a study combining 3D printing with the finite element method.

Introduction: The bone volume fraction (BV/TV) significantly contributes to the mechanical properties of trabecular bone. However, when studies compare normal trabeculae against osteoporotic trabeculae (in terms of BV/TV decrease), only an "average" mechanical result has been determined because of the limitation that no two trabecular structures are the same and that each unique trabecular structure can be mechanically tested only once. The mathematic relation between individual structural deterioration and mechanical properties during aging or the osteoporosis process has yet to be further clarified. Three-dimensional (3D) printing and micro-CT-based finite element method (µFEM) can assist in overcoming this issue. Methods: In this study, we 3D printed structural-identical but BV/TV value-attenuated trabecular bones (scaled up ×20) from the distal femur of healthy and ovariectomized rats and performed compression mechanical tests. Corresponding µFEM models were also established for simulations. The tissue modulus and strength of 3D printed trabecular bones as well as the effective tissue modulus (denoted as Ez) derived from µFEM models were finally corrected by the side-artifact correction factor. Results: The results showed that the tissue modulus corrected, strength corrected and Ez corrected exhibited a significant power law function of BV/TV in structural-identical but BV/TV value-attenuated trabecular samples. Discussion: Using 3D printed bones, this study confirms the long-known relationship measured in trabecular tissue with varying volume fractions. In the future, 3D printing may help us attain better bone strength evaluations and even personal fracture risk assessments for patients who suffer from osteoporosis.

Prognostic value of tumor necrosis based on the evaluation of frequency in invasive breast cancer.

BACKGROUND: Tumor necrosis (TN) was associated with poor prognosis. However, the traditional classification of TN ignored spatial intratumor heterogeneity, which may be associated with important prognosis. The purpose of this study was to propose a new method to reveal the hidden prognostic value of spatial heterogeneity of TN in invasive breast cancer (IBC). METHODS: Multiphoton microscopy (MPM) was used to obtain multiphoton images from 471 patients. According to the relative spatial positions of TN, tumor cells, collagen fibers and myoepithelium, four spatial heterogeneities of TN (TN1-4) were defined. Based on the frequency of individual TN, TN-score was obtained to investigate the prognostic value of TN. RESULTS: Patients with high-risk TN had worse 5-year disease-free survival (DFS) than patients with no necrosis (32.5% vs. 64.7%; P < 0.0001 in training set; 45.8% vs. 70.8%; P = 0.017 in validation set), while patients with low-risk TN had a 5-year DFS comparable to patients with no necrosis (60.0% vs. 64.7%; P = 0.497 in training set; 59.8% vs. 70.8%; P = 0.121 in validation set). Furthermore, high-risk TN "up-staged" the patients with IBC. Patients with high-risk TN and stage I tumors had a 5-year DFS comparable to patients with stage II tumors (55.6% vs. 62.0%; P = 0.565 in training set; 62.5% vs. 66.3%; P = 0.856 in validation set), as well as patients with high-risk TN and stage II tumors had a 5-year DFS comparable to patients with stage III tumors (33.3% vs. 24.6%; P = 0.271 in training set; 44.4% vs. 39.3%; P = 0.519 in validation set). CONCLUSIONS: TN-score was an independent prognostic factor for 5-year DFS. Only high-risk TN was associated with poor prognosis. High-risk TN "up-staged" the patients with IBC. Incorporating TN-score into staging category could improve its performance to stratify patients.

Prolonged fluoride exposure induces spatial-memory deficit and hippocampal dysfunction by inhibiting small heat shock protein 22 in mice.

Millions of residents in areas with high-fluoride drinking water supply ingest excessive levels of fluoride for long periods. This study investigated the mechanisms and impacts of lifelong exposure to naturally occurring moderate-high-fluoride drinking water on spatial-memory function by studying mice in controlled experiments. Spatial-memory deficits and disorders of hippocampal neuronal electrical activity were observed in mice exposed to 25-ppm or 50-ppm-fluoride drinking water for 56 weeks, but not in adult or old mice exposed to 50 ppm fluoride for 12 weeks. Ultrastructural analysis showed severely damaged hippocampal mitochondria, evidenced by reduced mitochondrial membrane potential and ATP content. Mitochondrial biogenesis was impaired in fluoride-exposed mice, manifesting as a significantly reduced mtDNA content, mtDNA-encoded subunits mtND6 and mtCO1, and respiratory complex activities. Fluoride reduced expression of Hsp22, a beneficial mediator of mitochondrial homeostasis, and decreased levels of signaling for the PGC-1α/TFAM pathway-which regulates mitochondrial biogenesis-and the NF-κß/STAT3 pathway-which regulates mitochondrial respiratory chain enzyme activity. Hippocampus-specific Hsp22-overexpression improved fluoride-induced spatial-memory deficits by activating the PGC-1α/TFAM and STAT3 signaling pathways, while Hsp22-silencing aggravated the deficits by inhibiting both pathways. Downregulation of Hsp22 plays a vital role in fluoride-induced spatial-memory deficits by impacting mtDNA-encoding subsets and mitochondrial respiratory chain enzyme activity.

Combining the guidelines and multiphoton imaging methods to improve the prognostic value of tumor-infiltrating lymphocytes in breast cancer.

Multiphoton microscopy (MPM) was introduced to label-freely obtain tumor-infiltrating lymphocytes (TILs) images from a total of 611 patients, and the prognostic value of TILs in breast cancer was assessed by the MPM method (TILs-MPM) and guidelines method proposed by the International Immuno-Oncology Biomarker Working Group (TILs-WG), respectively. Moreover, the clinical (CLI) model, TILs-WG + TILs-MPM model, and full model (CLI + TILs-WG + TILs-MPM) were developed to investigate the prognostic value of TILs. The results show that TILs-WG performs better in estrogen receptor (ER)-negative subgroup, and TILs-MPM is comparable with TILs-WG in the ER-negative subgroup, but has the best performance in the ER-positive subgroup. Furthermore, the TILs-WG + TILs-MPM model can significantly improve the prognostic power compared with the TILs-WG model, and the full model has excellent performance, with high area under the curve (AUC) and hazard ratio (HR) in both ER-positive, ER-negative subgroups, and the complete cohort. Our results suggest that the combination of TILs-WG with TILs-MPM model can greatly improve the prognostic value of TILs.

Combined computational analysis and cytology show limited depth osteogenic effect on bone defects in negative pressure wound therapy.

Background: The treatment of bone defects remains a clinical challenge. The effect of negative pressure wound therapy (NPWT) on osteogenesis in bone defects has been recognized; however, bone marrow fluid dynamics under negative pressure (NP) remain unknown. In this study, we aimed to examine the marrow fluid mechanics within trabeculae by computational fluid dynamics (CFD), and to verify osteogenic gene expression, osteogenic differentiation to investigate the osteogenic depth under NP. Methods: The human femoral head is scanned using micro-CT to segment the volume of interest (VOI) trabeculae. The VOI trabeculae CFD model simulating the bone marrow cavity is developed by combining the Hypermesh and ANSYS software. The effect of trabecular anisotropy is investigated, and bone regeneration effects are simulated under NP scales of -80, -120, -160, and -200 mmHg. The working distance (WD) is proposed to describe the suction depth of the NP. Finally, gene sequence analysis, cytological experiments including bone mesenchymal stem cells (BMSCs) proliferation and osteogenic differentiation are conducted after the BMSCs are cultured under the same NP scale. Results: The pressure, shear stress on trabeculae, and marrow fluid velocity decrease exponentially with an increase in WD. The hydromechanics of fluid at any WD inside the marrow cavity can be theoretically quantified. The NP scale significantly affects the fluid properties, especially those fluid close to the NP source; however, the effect of the NP scale become marginal as WD deepens. Anisotropy of trabecular structure coupled with the anisotropic hydrodynamic behavior of bone marrow; An NP of -120 mmHg demonstrates the majority of bone formation-related genes, as well as the most effective proliferation and osteogenic differentiation of BMSCs compared to the other NP scales. Conclusion: An NP of -120 mmHg may have the optimal activated ability to promote osteogenesis, but the effective WD may be limited to a certain depth. These findings help improve the understanding of fluid mechanisms behind NPWT in treating bone defects.

Label-free detection of invasive micropapillary carcinoma of the breast using multiphoton microscopy.

Invasive micropapillary carcinoma of the breast (IMPC) is a rare form of breast cancer with unique histological features, and is associated with high axillary lymph node metastasis and poor clinical prognosis. Thus, IMPC should be diagnosed in time to improve the treatment and management of patients. In this study, multiphoton microscopy (MPM) is used to label-free visualize the morphological features of IMPC. Our results demonstrate that MPM images are well in agreement with hematoxylin and eosin staining and epithelial membrane antigen staining, indicating MPM is comparable to traditional histological analysis in identifying the tissue structure and cell morphology. Statistical analysis shows significant differences in the circumference and area of the glandular lumen and cancer nest between the different IMPC cell clusters with complete glandular lumen morphology, and also shows difference in collagen length, width, and orientation, indicating the invasive ability of different morphologies of IMPC may be different.

One case report and literature review of arrhythmia caused by pituitrin.

Arrhythmias are perceived as a complication of pituitrin. However, injecting a standard dose of pituitrin via vein causes different arrhythmias. In our case, a 35-year-old female patient was admitted to the hospital due to a productive cough with sputum for 5 days and two occasions of massive hemoptysis. After 1 day of treatment using 500 ml normal saline with 10u pituitrin, the sputum was filled with small amounts of kermesinus bloodstains. When pituitrin was stopped without any other treatment, all presenting symptoms gradually subsided after half an hour, and the ECG returned to normal. Therefore, when treating massive hemoptysis by administering pituitrin intravenously, it is necessary to exercise great precaution and therapeutic measures.

3D printed trabeculae conditionally reproduce the mechanical properties of the actual trabeculae - A preliminary study.

Three-dimensional (3D) printing has been used to fabricate synthetic trabeculae models and to test mechanical behavior that cannot be recognized in the actual sample, but the extent to which 3D printed trabeculae replicate the mechanical behavior of the actual trabeculae remains to be quantified. The aim of this study was to evaluate the accuracy of 3D printed trabeculae in reproducing the mechanical properties of the corresponding actual trabeculae. Twelve human trabecular cubes (5 × 5 × 5 mm) were scanned by micro-CT to form the trabecular 3D model. Each trabecular 3D model was scaled ×2-, ×3-, ×4- and ×5-fold and then printed twice at a layer thickness of 60 µm using poly (lactic acid) (PLA). The actual trabecular cubes and the 3D-printed trabecular cubes were first compressed under a loading rate of 1 mm/min; another replicated stack of 3D-printed trabecular cubes was compressed under a strain rate of 0.2/min. The results showed that the stiffness of the printed cubes tended to increase, while the strength tended to converge when the magnification increased under the two loading conditions. The strain rate effect was found in the printed cubes. The correlation coefficient (R2) of the mechanical properties between the printed and actual trabeculae can reach up to 0.94, especially under ×3-, ×4- and ×5-fold magnification. In conclusion, 3D printing could be a potential tool to evaluate the mechanical behavior of actual trabecular tissue in vitro and may help in the future to predict the risk of fracture and even personalize the treatment evaluation for osteoporosis and other trabecular bone pathologies.

Medial tibial plateau sustaining higher physiological stress than the lateral plateau: based on 3D printing and finite element method.

BACKGROUND: Medial compartment knee osteoarthritis (KOA) accounts for most KOA cases, and increased trabecular bone volume fraction (BV/TV) is one of the pathological changes in the tibial plateau of KOA. How BV/TV changes before and after the menopause and its effects on medial compartment KOA are yet to be clarified. METHODS: Twenty femurs from twenty 12-week-old rats were included. The operated group underwent ovariectomy (to represent the osteoporosis condition), called the O group, and the non-operated group was the normal control, called the N group. Micro-CT scans of the femoral condyles were acquired 12 weeks after the surgery, and the volume of interest (VOI) of medial-, inter-, and lateral-condyle trabeculae were three-dimensional (3D) printed for uniaxial compression mechanical test and simulated by the finite element (FE) method. RESULTS: The results demonstrated that the O group indicated poorer trabecular architecture than the N group in three parts of the femoral condyle, especially in the intercondyle. Within the group, the BV/TV, trabecular thickness (Tb.Th), and trabecular number (Tb.N) ratios between the medial and lateral condyles were greater than 1 in both N and O groups. The medial condyle trabeculae's mechanical properties were higher than those of the lateral condyle, and this superiority appears to be broadened under osteoporotic conditions. FE modelling well reproduced these mechanical differentiations. CONCLUSIONS: According to Wolff's law, the higher BV/TV and mechanical properties of the medial femoral condyle may be due to inherent imbalanced loading on the knee component. Alterations in BV/TV and their corresponding mechanical properties may accompany KOA.